PixelPyros – call for sponsors

7921701370_4fc48502b6_b

In the final run up to the first date at Nottingham GameCity, it’s about time I make one more push for sponsors. It’s a chance to have your name associated with this massive installation that’s travelling around the country. And we’re already getting some sniffing around from the TV stations, so we’re hoping it’ll get lots of profile.

We have platinum and gold levels for the corporations, but if you’re not Microsoft or Google you can still help – we now have micro-sponsor slots starting at £100.

Platinum : Entire tour £5,000, one night £1,000
Gold : Entire tour £3,000, one night £800
Micro sponsor : £100 per night or £300 for the whole tour

Not only do you get your logo projected on the screen in-between shows, but you’re also helping the event to happen. Your company can truly be a supporter of this very cool arts project (even if I say so myself 🙂 )

There are limited spots so please mail me seb@leedelisle.com if you’re interested in one of these. Thanks!

[UPDATE] of course I forgot to mention the most important part! We’re expecting at least 30,000 people to see the show across the tour. We’ve already got a couple of sponsors confirmed so if you’re interested, let me know soon!

I need your help – November PixelPyros dates available

We’ve just heard that one of the PixelPyros tour locations is having trouble with its funding so may have to cancel, which could leave us with a gap in our schedule for November.

7921703020_7133b199df_b

So I’m asking for help – if you know any event, council or company that might want a digital interactive fireworks display with lasers please tell them about us! We’re thinking that there must be a few organisations out there that might like something a bit special for Guy Fawkes night this year.

It’s part of the tour so it benefits from hugely discounted equipment costs – it’s probably half the price that it would normally be, ie roughly the same price as a decent real-life fireworks display (and much more pet-friendly and safe than traditional fireworks).

So feel free to put any potential new locations in touch with me at seb@seblee.co or point them at pixelpyros.com. Thanks!

PixelPyros development – working with lasers part 2

In the first part of this series, we looked at the basics of how scanning lasers work, so now we’ll cover the equipment that you need and how it all connects together.

lasersPhoto: FFP Laser systems

Reminder : lasers are dangerous and you can permanently damage your retina. If you’re interested in working with lasers, please seek advice and supervision from qualified experts, and always wear eye protection.

25pincableThe ILDA laser interface uses standard 25 pin D-connectors.

First thing up on the equipment list: a hardware interface for the laser. The standard laser interface is called ILDA (named after the International Laser Display Association), and it’s an analogue format that uses standard 25 pin D-connectors, like parallel printers from the past. It’s a well established standard and most modern scanning lasers support it.

So we need something that can provide an ILDA connection and most ‘laserists’ (terrible term huh?) use a hardware/software combination like Pangolin to produce laser shows with pre-set patterns. These systems are pricey, closed-source and totally proprietary.

Thankfully there is an open alternative – a hardware ILDA convertor called Ether Dream. You send data to it over a standard ethernet network, and the Ether Dream converts it into the analogue ILDA signal. (This type of laser interface converts digital into analogue, so it’s referred to as a DAC – Digital to Analogue Converter.)

And thanks to the openFrameworks addon that wraps the Ether Dream SDK it’s easy to get started with it. (Thanks Memo!). [NOTE – this is a very old post, and I have since been working on my own very powerful openFrameworks add-on called ofxLaser ]

SONY DSCThe open-hardware laser controller – the Ether Dream

I’ll show you how to work with openFrameworks and ofxEtherdream in the next post, but before that, we’re gonna need a laser. For the PixelPyros tour itself LM Productions will be providing us with a crazy high power 11W PIKO laser worth around €30,000. It can handle 80,000 points per second (PPS) and it’s a white laser so I’ll have full RGB control.

pikolaserThe powerful PIKO laser even has a fancy touch-screen controller!

For the R&D part of the PixelPyros project, I need a laser of my own in the studio to experiment with – the 11W laser could easily burn a hole in the wall so it would be a bit over the top! I asked LM for advice, and they recommended the Laserworld CS-1000RGB SE with upgraded galvos capable of 50,000 PPS, priced at around £1,000. [Please note – this is a very old post and I DO NOT recommend buying this laser. There are far better alternatives to get started with]

CSLaser
The LaserWorld CS-1000RGB SE – a white laser capable of 50KPPS

At 1W, it’s 11 times less powerful than the PIKO laser, but about 2,000 times brighter than an ordinary laser pointer, and still too bright to work with in a small space. I thought that all white lasers had granular control over each colour channel, so I was disappointed to find out that each of the 3 colours were either just on or off. Which meant I couldn’t reduce the brightness – if I want a laser with attenuation, i.e. granular control, I need to get a better laser. (Naturally the expensive PIKO laser is fully adjustable).

In the meantime all I could do is get some tinted acrylic to make the laser less blindingly bright, which helps my eyes!

Next up – the results of my experiments with the laser and the practicalities of getting good clear laser lines and dots.

PixelPyros development – working with lasers part 1

lasers
Photo : Dave Wilson

Over the next few weeks I’ll be working hard on new features of PixelPyros, and I thought it’d be fun to share what I’ve learned. I’m going to start with lasers. Because, well, because lasers.

First, a quick word of warning: Lasers are dangerous and you can seriously damage your eyes or even go blind. If you’re interested in working with lasers, please make sure you seek advice and supervision from qualified experts, and always wear eye protection.

OLYMPUS DIGITAL CAMERA
Photo : Rachel Richardson-Castro

One of the few things that humans and cats have in common is that we love lasers, so I’ve felt compelled to add lasers to PixelPyros for a while. Modern projectors are pretty bright, but they can’t get anywhere near as bright as real fireworks. Lasers on the other hand can make super bright points of light – so bright that they look like they are emitting light rather than just reflecting it!

My thinking was that I could use lasers to pick out the bright points in the fireworks, and still use the projectors for the detail. I’m not sure exactly how this will look. I just know that I want really beautiful super bright points of laser light. 🙂

To get started I needed to find people who owned some big lasers, and I was put in touch with LM Productions in Eastbourne. They’ve been experts in laser stuff since the 80s and we got on like a house on fire. Thankfully they’re excited about the project and they’ve come on board as our production company – they’ll be be providing not just lasers, but also the massive Christie projectors and sound system.

Let’s rewind a little and take a quick look at how lasers are controlled. Anyone who’s ever used a laser pointer knows that you can point it at the wall to make a little point of light, and if you move it around quick enough, the persistence of vision effect kicks in and it’ll appear to leave a trail as it moves.

lasermirrors
The tiny mirrors used to move the laser. Photo: Mersen

A scanning laser can be moved around electronically to make shapes and patterns. Well, actually, the laser itself doesn’t move at all – it’s reflected off two mirrors. Each mirror is rotated on a single axis – one controls the horizontal position and the other controls the vertical position of the laser.

Slide 1
How the mirrors move the laser, in a very confusing diagram I stole off the internet

Each mirror is attached to a galvanometer, or galvo, which controls its rotation. Galvos use electro-magnets to convert electrical energy into movement – they’re also used on the needles on old-fashioned VU meters. They can be incredibly fast and accurate, cheaper units can move the laser to 30,000 points per second, professional ones can handle 80,000.

VUMeter
VU meters use a galvanometer to move the needle. Photo by Dafydd Thomas

To make distinct shapes, we turn the laser off, move to the start point, turn it on, then move it around all the points in the shape, then switch it off again. Do this again for as many shapes as you want to project. Obviously the fewer points there are the faster your laser moves and this makes the image less flickery.

You can get lasers in most colours, and also ‘white lasers’ – units with integrated red green and blue lasers that can make any colour.

In the next part I’ll talk about the hardware you need, and how to hook everything up and communicate with the laser controller directly.

PixelPyros digital fireworks – tour funded!

Thanks to your amazing response to my request for help finding venues, I’m excited to announce that the PixelPyros tour is now definitely happening – we have 9 dates in 5 UK cities across two months starting at the end of September.

It’s been an insanely busy time – as soon as we had a confirmation of interest for each location we put forward our Arts Council funding application. As it was such a large grant it would take 12 weeks to process. So you can imagine how we felt when we found out 3 weeks early that our application had been approved!

That was just a few weeks ago and since then we’ve been working so hard to get the final details together. I’ll be blogging about my process here, starting with my experiments with lasers (I told you I was adding lasers to the show, right?).

In the meantime here are the dates :

28th September Brighton – The Level
18th October TBA (midlands)
1st November TBA (midlands)
14th November TBA (north)
15th November TBA (north)
16th November TBA (north)
17th November TBA (north)
6th December TBA (north)
7th December TBA (north)

I’ll be announcing where each of the dates are over the next week or two (we’re not allowed to go public until we have all the paperwork sorted).

Follow @PixelPyros on twitter for updates.

PixelPyros tour – I need your help!

[UPDATE 2] We have now confirmed our Arts Council funding and 9 dates in 5 cities! More details.

[UPDATE]I’ve been overwhelmed by interest today, and we’re currently talking to people all over the country! We only have 4 slots and it looks like we’ll have to start getting choosy. If you want us to consider you, please get in touch! Mail seb@seblee.co or tweet me at @seb_ly

Very exciting news this week is that we’re putting together a tour for PixelPyros in the Autumn this year and we’re even adding lasers! But I really need your help to do it.

We’re looking for UK city councils, events, and locations where you think our show will work. Perhaps there’s a “White Night” type event where you live? Perhaps you know the council like to promote cool outdoor events in your city? Or maybe you run a tech conference that would like something a bit different for your after party?

Even if you don’t, perhaps you could help spread the word with a tweet or social media update of your choice? I’d be very grateful! Ideally we’re looking at dates between September and November but there is obviously some flexibility there.

We’re applying for Arts Council funding which will hugely subsidise the events, but of course we’ll need to bring in some money from the organisers too. So if you’d like us to bring PixelPyros to you, please get in touch at seb@seblee.me or tweet me.